Light Filtering vs Blackout Fabric -- What's the difference? Light blocking fabrics are available in two different grades, light filtering and blackout.
Light filtering fabrics will block much of the light coming into your room, but not all of it. The fabric used in light filtering shades can be decorative or technical fabric, like screens. These fabrics allow some light to pass through the fabric but still blocks most of the light. Additionally, some light will pass around all four sides, including the top, of the shade when installed.
Blackout fabrics, such as this 7500R line, are perfect when there is a need for more darkness. Blackout fabric has multiple layers that block 100% of the light. While the fabric blocks the light, some light may get in through light gaps on the top, side, and bottom of your shades. The side gaps allow the shade to raise and lower without rubbing the sides of the window frame. For enhanced light control, you can cover these side and bottom gaps with light blocking side channels and sill rails. Considering that QMotion shades already offer the smallest light gap in the industry at 1/2 of an inch, adding Side Channels and Sill Rails reduces that even further. For complete light blockage, your installation may require architectural changes to the windows to ensure that they are square and flat, and you should consider outside mounted shades for the greatest level of light control.
Composition: 100% Polyester with Acrylic Coating
Width: 118" (300cm)
Weight: 12.14 oz/yd2 (412 g/m2)
Thickness: .014 in. (.356mm)
California Technical Bulletin 117 NFPA 101 (Class B Rating)
IBC Section 803.1.1 (Class B Rating)
GREENGUARD/GREENGUARD Gold: certified to these standards for low chemical emissions into indoor air during product usage.
Bacterial and Fungal Resistance:
ASTM E 2180
Openness Factor: 0%
UV Blockage: Approximately 100%
Actual colors will vary. Check with QMotion Advanced Shading Systems sample collections prior to ordering. To request a swatch please contact us.